1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

24 series wont angle

Discussion in 'Sno-Way Discussion' started by StathemLawncare, Jan 26, 2008.

  1. StathemLawncare

    StathemLawncare Member
    Messages: 37

    My 24 series has been sitting in my shop for a few years,put it on another truck.I installed it last night to make sure it worked,And now it wont angle but the motor is running.Need some help please.I think the cross relief valve is stuck.I need to know how to fix.
     
  2. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Check and make sure the "spool" in the angle system isn't stuck. Look in the mechanic's guide Toby4492 posted the links for step by step instructions.
     
  4. StathemLawncare

    StathemLawncare Member
    Messages: 37

    Thanks Toby and Basher,it was the spool stuck .Took it to the farm and fixed it in 10 min or so.All is good now.