1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

24 series mount

Discussion in 'Sno-Way Discussion' started by AndyTblc, Jan 24, 2009.

  1. AndyTblc

    AndyTblc Senior Member
    Messages: 681

    I just bought a used plow. It came with everything, and it was mounted on a 95 suburban, which is the same body style as mine, but the mount doesn't line up, it's not wide enough, it is where it needs to be length wise, but not width, how can I modify it to work? I need half inch on each side
     
  2. Ctll

    Ctll Member
    from midwest
    Messages: 82

    can you switch the end plate on the mount fron side to side?
     
  3. AndyTblc

    AndyTblc Senior Member
    Messages: 681

    I think I know what you're thinking of, but my bracket bolts up to where the tow hooks were, and then goes back to the skid plate., it doesn't come down, and no end plates. The mount is all one piece, except you can separate where the part hooks to the truck, and where it hooks to the plow. But you can't adjust anything to make it fit.