1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2013 super duty

Discussion in 'Equipment, Tools & Vehicle Pictures' started by camaro 77, Sep 30, 2013.

  1. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    anyone care to share some under hood pictures of fisher plow installed on a new superduty I am doing my own wiring but some pics would help me with the placement of the module and the solenoid.
     
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,550

    diesel or gas?
     
  3. fatheadon1

    fatheadon1 Senior Member
    Messages: 404

    if the plow is new it should be fleet flex solenoid is on the plow it self. some put the module behind the headlight i myself have mine ontop of the fuse box for easy of access if something go wrong at 3 am in a storm. my under hood is a mes with aftermarket wiring so i dubt my pics would help but the install is pretty simple iv done a few an the wiring takes an hour or 2
     
  4. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    its diesel and the plow is off my 2005 f-350 truck wiring is the same but had to get new push plates
     
  5. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,550

    I can post a picture tomorrow but I put mine behind drivers headlight.
     
  6. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    any pics would help me thanks
     
  7. cj7plowing

    cj7plowing Senior Member
    Messages: 382

    mine to is behind the drivers head light you really don't see much I will take a pic tomorrow
     
  8. wilsonsground

    wilsonsground Senior Member
    Messages: 201

    I did mine mysel last year. The iso module sits on the fuse box cover. I'll post a picture tomorrow night for you, On my ipad right now.
     
  9. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,550

    Here's a few pics when I striped my 012 in June.

    IMG_20130616_083543_396.jpg

    IMG_20130616_081319_654.jpg

    IMG_20130616_081417_237.jpg

    IMG_20130616_103603_613.jpg

    IMG_20130616_081723_278.jpg
     
  10. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    so whats the deal with the 3 port module I have a 4 port my X-BLADE IS OFF OF MY 05 but I am being told by 3 different fisher dealers that the wiring is all the same. I have to mount my solenoid under my hood the new plows have the solenoid on the plow pump is this what you guys are sayin?
     
  11. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,269

    Yes the solenoid is on the plow itself with the fleet flex.
     
  12. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,550

    Couple of Q's

    Was your 05 a Ford super?

    Was was your solenoid mounted before?

    Are u sure you have one on truckside?

    Is it a three plug or a two plug plowside?
     
  13. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    old truck was a 2005 f-350 superduty crew cab diesel

    I have a 3 plug plow side hook up (plug in power and ground, and then I have a plug for lights and a plug for the controls)

    the ISO module is a 4 plug

    yes on the under hood mounted solenoid I removed all the old wiring myself
     
    Last edited: Oct 3, 2013