1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2009 jk with 7'6" fisher HT

Discussion in 'Jeeps' started by sld92e_23, Dec 3, 2014.

  1. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

  2. novawagonmaster

    novawagonmaster Senior Member
    Messages: 177

    Nice rig!

    Any plowing upgrades, or just a blade?
     
  3. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    thanks...well, I ordered a front timbren kit..because the blade sits low after the sag of it up...it carries it well, but if you angle it...it hits the ground on bumps etc... so this friday a 3" lift is going to be installed...Im just not sure if i should use both or just the lift

     
  4. ken643

    ken643 Senior Member
    Messages: 820

    Very nice, looks good!! But yes it needs something in the front end. i used the Timbrens. Good luck with the setupThumbs Up
     
  5. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    thx...and yeah im going to use the timbrens along with the 3" lift....

     
  6. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    here it is with timbrens installed, 2.5" lift, and new 35" cooper stt tires..new fisher ht plow [​IMG][​IMG]
     
  7. 3bladz

    3bladz Senior Member
    Messages: 172

    Right on! Nice rig.
     
  8. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    thanks!! it tok a while to figure out what setup i wanted...but Im def pleased with the result...we just need some actual snow here in Boston now


     
  9. theplowmeister

    theplowmeister 2000 Club Member
    from MA
    Messages: 2,552

    Did you change your dif gears or just put on bigger tires thereby lowering your finale drive numbers.
     
  10. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    I didnt re gear...however, I installed a superchips flashpaq and that helps because i can change the tire size to 35" and it shifts nicely...I live in Boston..so im only occasionally on the highway anyway...

     
  11. novawagonmaster

    novawagonmaster Senior Member
    Messages: 177

    Highway is not an issue at all. You gave up some low end grunt.
     
  12. RJL

    RJL Junior Member
    Messages: 2

    Looks great. Even after the lift you still needed the timberens? What lift did you get? I'm asking because I'm seriously thinking of putting a 2.5 on our 2010 JKUR and a plow.
     
  13. EHoward19

    EHoward19 Junior Member
    from Boston
    Messages: 29

    Nice Setup
     
  14. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    i already had purchased the timbren kit , so i used it...prob dont need it on there now....I just but a rough country 2.5 BB lift ( spacers kit) on mine..added a front and rear adjustable track bar from jks and I just ordred a dual fox steering stabilizer setup as well...

     
  15. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    thanks ....i looked through a lot of jeep pics to see what i wanted etc...

     
  16. sld92e_23

    sld92e_23 Member
    from Boston
    Messages: 69

    its true...it isnt the fastest by any means..but after its rolling, it seems like i changed nothing

     
  17. brad11ny

    brad11ny Senior Member
    Messages: 127

    Very Nice! I'm sure it's getting some use today. How do you like the HT?
     
  18. dt5150

    dt5150 Senior Member
    from NH
    Messages: 142

    you were sayin...? xysport
     
  19. bschurr

    bschurr Member
    Messages: 60

    ^^ Truth

    How did you make out sld92e_23 ??
     
  20. Allagash

    Allagash Senior Member
    Messages: 159

    Great looking Jeep. It's amazing what a small lift and some some beefier (than stock) looking tires will do to the look of a Jeep!