1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2008 F-250 6.4L - Built

Discussion in 'Used Plowing and Truck Equipment Forum' started by EGLC, Oct 17, 2015.

  1. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    Trying to help my friend out with selling his fully built truck. This is a show and is absolutely MINT. All work was done by a nationally certified mechanic. It was built for reliability with all the work done for it to be a "Go Fast" truck at the "flip of a switch".

    2008 Ford F-250 Lariat
    6.4 Diesel - Auto - 118K
    2nd Owner purchased @ 85K

    Here's everything done to it:

    EXTERIOR:
    Recon LEDs
    Rigid LEDs: D2 Cubes & 20" Bar
    Color Matched Headlights w/ LED Oracles
    Bilstien Steering Stabilizer
    Zone 4" Lift Kit with Gas Shocks
    Fuel 'Hostage' 20x12 w/ 44mm offset
    Toyo AT2's 35"x12.5"
    Ceramic Brake Pads all around w/ 1/2" life

    INTERIOR:
    Carhart Seat Covers
    Premier Poineer Head Unit w/ Navigation
    Satellite Radio
    Backup Camera & Sensors
    LED Lighting
    NO Rips or Tears in Seats!!

    ENGINE:
    HNS Mini Maxd Tuner w/ Unlocked Code for HNS Max Calibration (custom tuning)
    GearHead Tunes spec'd for this specific setup
    (tune set for economy but can be changed on the fly if you'd like)
    BorgWarner S366 Turbo from Maryland Diesel Performance
    Maryland Diesel Performance Single Turbo Kit
    BD Performance 6.0 Manifolds w/ Maryland Diesel 304 Stainless Steel 6.0 Up-Pipes (all pipes are ceramic coated & heat wrapped)
    4" Down Pipe to 5" Flow Pro Stainless Steel Straight Piped (all pipes are ceramic coated & heat wrapped)
    Sinister Diesel EGR & EGR Cooler Delete w/ Intake Elbow
    Sinister Diesel CAC Pipe w/ Bungs
    Brand New- Big Dog Diesel O-Ringed Complete Cylinder Heads (including new Valves, Valve Springs & Valve Seats)
    ARP Head Studs w/ Factory OEM Head Gaskets
    New Complete Rocker Arms Set
    All New Gaskets & Seals (all new top end gaskets, valve cover, injector o-rings)
    All New Injector Jump Lines & Lines from High Pressure Pump
    New Water Pump
    New MitsiMoto Aluminum Radiator w/ lifetime warranty
    Updated Coolant Hoses (double o-ringed)
    New Thermostat
    New Front Structure
    New Oil Pump
    New Batteries
    New Alternator
    Open CrankCase Line
    New Intake Manifold Gasket
    Intake Manifold Professionally Cleaned


    $37,900 OBO
     
  2. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Oct 17, 2015
  3. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

  4. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

  5. JustJeff

    JustJeff 2000 Club Member
    Messages: 2,052

    6.4? When did Ford ever make a 6.4?
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,975

    2008_2010....right after the 6.0 and before the new body style change in 11.
     
  7. JustJeff

    JustJeff 2000 Club Member
    Messages: 2,052

    Gotcha. Shows how much I know about Powerstrokes.
     
  8. rywnygc

    rywnygc Member
    from 14033
    Messages: 86

    That's a sick truck, buddy. Good luck with the sale.
     
  9. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    Lowered to $35,900 OBO he needs to sell it
     
  10. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

    That's a sharp clean truck and seems like it was built well. However, he's going to have to find the guy who wants a truck built just like that to get that kind of money or he's going to take a bath on it. Vehicles in general are pay to play.
     
  11. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,535

    If I had the extra coin....

    And a black interior.
     
  12. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    Yea I hear you. There are stock 6.4s selling for low 30s. My friend sold her 2009 all stock lariat with 88k for $31k so the asking price is pretty fair.
     
  13. RIRAM2500HD

    RIRAM2500HD Senior Member
    from 02914
    Messages: 106

    He's gonna have a hard time getting that price.
     
  14. ponyboy

    ponyboy Senior Member
    Messages: 957

    In our area it's a fair price for what looks to be a clean truck but I agree it's a tough sell but it only takes one person to buy it
     
  15. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    He's down to $34,500 obo and has all receipts for truck. Needs nothing.