1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2005 F-350 Bump Stop/Timbren

Discussion in 'Ford Trucks' started by cda817, Nov 24, 2009.

  1. cda817

    cda817 Senior Member
    Messages: 284

    I changed out my rear Bump stops easily it was just a bolt and replaced them with timbrens. Figured the front would be just as easy but it is attached some other way and can't seem to get it off. Called timbrens they said it should be a bolt and its not I have two F-350's and they are both the same way. Any help?
  2. nevrnf

    nevrnf Senior Member
    Messages: 456

    Just grab the front bump stop and pull. They are just pushed into the base. The bolt for the base is under the bumpstop.
  3. cda817

    cda817 Senior Member
    Messages: 284

    Ok I'll have to give that a try tomorrow. Thank you.
  4. cda817

    cda817 Senior Member
    Messages: 284

    Sure enough they pull right out. I spent 30 minutes trying to get them out every which way and couldn't get them out. Thanks for your help.