1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2001 F250 MM2 Insatallation Questions

Discussion in 'Ford Trucks' started by Hookspacken, Oct 11, 2006.

  1. Hookspacken

    Hookspacken Junior Member
    from 12182
    Messages: 5

    I have recently picked up a MM2 8' HD for my '01 F250, I removed it from an '03 F250. Before I attempt to install it on my truck I have a few questions I hope you guys can help me with. My questions are as follows:
    When I took the plow off the '03 250, the drivers side headlight was not functioning, both plow and vehicle. Their is was 4 port iso module with the headlights plugged into 3 & 4, I belive. When I switched # 3 & 4 ports, the drivers lights worked and the passenger side was out. I am taking this to mean the iso module has a bad port, correct?
    If that is the case, and I have to purchase a new module, does the '01 take the same 4 port module as the '03? I have tried to use the Fisher E Match, but cant get any part numbers and the local Fisher dealer doesnt seem to want to be of any help unless they are doing the work on the vehilce.
    Any help would be greatly appreciated
     
  2. Hookspacken

    Hookspacken Junior Member
    from 12182
    Messages: 5

    Anyone?..........Somebody has to know somw information......