1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2 Yard dump box F/S

Discussion in 'Used Plowing and Truck Equipment Forum' started by sonicblue2003, Nov 19, 2006.

  1. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    Had this on my 79 250. Comes with cyl and sub frame. Has fenders built in.
    Old cable and cyl system. Reservoir is in the cylinder body. Functioning two way tailgate. Was built by Woods.Always worked great. Build a trailer, add a hyd unit and go dumping.Or install on your 3/4-1 ton and use your plow pump like I did.
    $750.
    PM for info.
    Pics to follow.
     
  2. Keith_480231

    Keith_480231 Senior Member
    Messages: 389

    Might be interested need some pics though. Are you close to the Windsor Tunnel or would it be easier to go across in Sarnia??? Live closer to Sarnia so that would be easier. If Windsor how far from Tunnel
     
  3. Do It All Do It Right

    Do It All Do It Right Senior Member
    Messages: 231

    do you have any pics
     
  4. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I'm about 15 min from the tunnel near Windsor Airport.
    I will be taking pics today and hope to have them up tonight.
    Thanks for the inquiries.
     
  5. Keith_480231

    Keith_480231 Senior Member
    Messages: 389

    ok will be waiting...
     
  6. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I can email from my phone Call me @519-796-8386
     
  7. Do It All Do It Right

    Do It All Do It Right Senior Member
    Messages: 231

    did you get the pics yet
     
  8. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I'm working on it.. beer got in the way!
     
  9. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    The best I could do right now.

    Here are some for now'
    It looks worse than it is the floor is new 10ga steel and so are the sides,its just suface rust.

    dump front.jpg

    dump side.jpg
     
    Last edited: Nov 19, 2006
  10. Keith_480231

    Keith_480231 Senior Member
    Messages: 389

    So let me get this straight. You said that you were running this off your plow hook-ups? What is the weight this could lift. I have a dump truck that is electricover hydraulic and have been "stuck" a couple of time because of weight. Why so much surface rust if replaced last year with 10 gage steel? Was this used with salt at all? Thanks for the info in advance. You are not far at all from me. And one more thing is the price Canadian $$$? Thanks again Keith
     
  11. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I never had any problems lifting it, it was just slow. Plow pumps don't put out much volume but with a 2-1 ratio on the cyl (cable and cyl) and the pump still has at least 1000 psi so I never had any problems except with wet clay. And you just jerked a bit and it slid out.
    The floor was new when I pulled it off the truck 6 years ago and it has been inside that barn for 5 years.Like I said it looks worse than it is.
    Cnd money.
     
  12. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    TTT
    Make an offer and pick it up...
    Anyone?
     
  13. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    Ok. $500. and its yours... Gotta move it, the guy is tearing down the barn and needs it gone.
     
  14. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    Anybody ????
    Its a steal at $500.cdn. It would cost that much to buy the steel to make it.
     
  15. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    Still for sale
     
  16. Keith_480231

    Keith_480231 Senior Member
    Messages: 389

    Has been such a terrible season no real extra money but could come up with say 200. Let me know what you want to do?
     
  17. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I Still have it... Now somebody must need it>> Got to go!!!
     
  18. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    The barn is being tore down as I type this I have lost the storage.... Make me an offer...
     
  19. terrapro

    terrapro PlowSite Veteran
    from MI
    Messages: 3,878

    if its still available let me know the size and weight and if you know that the frame could fit on a 90 chevy 2500. my plow truck could use a new bed, the one thats on it is salted out.
     
  20. sonicblue2003

    sonicblue2003 Senior Member
    Messages: 188

    I still have it. It should fit your truck no problem. I had it on a 79 F250 8' bed frame.
    PM me if you want to see it. I see your in mich. I'm only 10 minutes on the other side of the Ambassador bridge.
    I'm going to guess that it weighs about 600-800 lbs.I believe its 5' wide by 7' long