1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2 yard Buyers Salt Dogg Spreader - Pics and Video

Discussion in 'Used Plowing and Truck Equipment Forum' started by Shooter Mike, Sep 18, 2012.

  1. Shooter Mike

    Shooter Mike Junior Member
    Messages: 1

    2.0 cubic yard Buyers Spreader and variable speed controller. - ASKING $2700

    Here's a YouTube video from this evening of the spreader: http://www.youtube.com/watch?v=OWOnRHTBOpw

    Has been professionally serviced. Has 1 1/2 seasons of light usage.

    Here's the info from the website:

    Material Hopper – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. (Molded fork slots in hoppers makes for easy one man installation & removal, requires extended fork, or lift from 4-point tie downs.)

    Auger – 2.5" dia. screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.

    Material Flow/Output – Salt, 2.2 cu. ft./minute; Salt/Sand, 1.3 cu. ft./minute. Spread width is variable from 5 to 38 feet.

    Spinner Chute Assembly – A 11.5" polymer disc is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty polymer chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the vehicle and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 30'. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.

    Electric Motors – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with two independently powered vibrators. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50°C to -105°C). An in-cab console features independent controls for the auger, spinner and vibrator.

    Standard Equipment – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 of force pounds for maximum performance. Spreader hold-down kit.

    IMG_3664.jpg

    IMG_3662.jpg
     
  2. SullivanSeptic

    SullivanSeptic PlowSite Veteran
    Messages: 3,422

    Where you located? Cant tell from my ipad
     
  3. Shooter Mike

    Shooter Mike Junior Member
    Messages: 1

    Caroline County, VA