1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1999 dodge Ram Help

Discussion in 'Residential Snow Removal' started by bdurisin, Nov 14, 2008.

  1. bdurisin

    bdurisin Junior Member
    Messages: 3

    Hello, I am new to this site and have a question that i am hoping someone can answer for me. I have a 97 Dodge Ram 1500 4x4 Sport. I am putting a 97 Dodge Ram 1500 Meyer Mount on it. (more substantial than the 1500 one) anyway, I picked up the mount for about 150 bucks but it is missing the rear brackets that bolt up to the frame. I am going to make these brackets, but not sure exactly where they are supposed to bolt onto the frame.. I have the install instructions from Meyer, butstill can't figure out exactly where it goes.. drives side looks like you use one of the existing bolts that holds teh stearing gearbox in, but not sure. Can someone by chance e-mail me some pictures of he this mounts? I would really appreciate any help with this... bdurisin@gmail.com
     
  2. BAPTRUCKING

    BAPTRUCKING Junior Member
    from MD
    Messages: 8

    Storks Auto and snow plows
    5138 Bernville Road
    Bernville Pa 19506
    New, Used, and Rebuilt Plows
    610-488-1450
    Your truck uses same as 2500. I had that same set up. This guy can maybe answer your question though.
     
  3. bdurisin

    bdurisin Junior Member
    Messages: 3

    Thanks for the info.. I assume he sells plow parts? I finally made the bracketts, but am still looking for a hoop, but don't want to spend a fortun on it since i will only be doing my own driveway..
    ...
     
  4. BAPTRUCKING

    BAPTRUCKING Junior Member
    from MD
    Messages: 8

    check out his store on ebay.