1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1995 GMC 2500 - Western 9ft unimount - 49kmi original miles

Discussion in 'Used Plowing and Truck Equipment Forum' started by fitch, Jan 10, 2010.

  1. fitch

    fitch Junior Member
    Messages: 22

    Looking to sell my 1995 GMC 3/4 ton. It is a cheyenne edition, which has standard options, automatic trans, 49,000 ORIGINAL miles, and 9ft western unimount blade. Truck has class 3 hitch, bedliner, tool box, and new rear rubber but enough on the front to make it through the season plowing. Body has some flaws such as the GM flaking paint on the hood, along with the passenger side cab corner banged in a lil bit. Other wise the body has a few character dents and dings. Bumpers also have a few dents in them as well and the interior is missing a floor trim panel on the driverside and the passengerr arm rest wore out and pulled apart, so i tossed it! Im purchasing a new house, and seeing as i put too many eggs in one basket.... i dont have the work needed to keep both my trucks running. So i decided that i would rather sell this truck to help pay for a few new things for the house. I can provide more pics... just let me know if there are any specific you would like. Im asking $5500 or best offer. Help me out guys.... i have no room to store it come a few weeks, and if i dont have a use for it, id sure like to see someone make money with it. I have plowed with the truck 4 times this season so far. Truck does very well, and recently had new rear main brake line, batteries, alternator, serp. belt, blower motor, & resistor along with a few other things. The plow is in perect working order, and just had complete fluid flush and change with blue S.A.M. low temp fluid. Plow could use a coat of paint. I planned to redo it in spring, Im located in Waukesha, WI. Check out my listing on Craigslist. My number is on this posting. Thanks
    http://milwaukee.craigslist.org/cto/1539446759.html

    <a href="http://s787.photobucket.com/albums/yy157/fitchez/?action=view&amp;current=DSC03302.jpg" target="_blank" rel="nofollow"><img src="http://i787.photobucket.com/albums/yy157/fitchez/DSC03302.jpg" border="0"></a>

    <a href="http://photobucket.com" target="_blank" rel="nofollow"><img src="http://i11.photobucket.com/albums/a154/tgapinski/DSC03257.jpg" border="0"></a>
     
    Last edited: Jan 10, 2010
  2. Schwinn68

    Schwinn68 Senior Member
    Messages: 164

    would you sell just the plow? I could use another 9 footer
     
  3. fitch

    fitch Junior Member
    Messages: 22

    i had a guy come look at the truck 3 days ago.He called me yesterday and asked if i would sell it without the plow. IDK what he is looking to spend since he said that 5K was a lil more than they wanted to spend. Let me do some research on this. You looking for the plow only? or do you need the truckside stuff as well?
     
  4. Schwinn68

    Schwinn68 Senior Member
    Messages: 164

    plow only. can you get some pics of the plow? I'd like to see the back of the moldboard and what the frame looks like. How is the cutting edge?
     
    Last edited: Jan 10, 2010
  5. fitch

    fitch Junior Member
    Messages: 22

    cutting edge is newer and barely worn. Only flaw is the deflector is off... common unimount rust and vibrate apart! i have to weld that back on. frame is good. ill get some pics. give me a few minutes and ill uploade them on here.
     
  6. fitch

    fitch Junior Member
    Messages: 22

    <a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a154/tgapinski/DSC03283.jpg" border="0" alt="Photobucket"></a>

    <a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a154/tgapinski/DSC03282.jpg" border="0" alt="Photobucket"></a>

    <a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a154/tgapinski/DSC03284.jpg" border="0" alt="Photobucket"></a>

    <a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a154/tgapinski/DSC03280.jpg" border="0" alt="Photobucket"></a>
     
  7. Schwinn68

    Schwinn68 Senior Member
    Messages: 164

    I'd rather just fix the blade myself if I buy it. pm me a price and we'll go from there.
     
  8. srt management

    srt management Junior Member
    Messages: 6

    still have trk?
     
  9. tattooedplower

    tattooedplower Member
    Messages: 31

  10. fitch

    fitch Junior Member
    Messages: 22

    i have sold the truck... decided to take the plow off and keep it. Ironically i came across a 99 gmc to replace it... it all worked out in my best favor as well, since i was able to take the cash for a down payment, and trade in my 08 1/2 ton crew cab for the 99. Dropped a payment and still able to have 2 trucks for plowing. Now just trying to make time to meet a guy to talk about helping him with 20 of his 40 accts, so both trucks are working. Debt ratio is looking good, and now im on my way to a lil less cash down on house, but no debt!!!