1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1995 ford F250

Discussion in 'Western Plows Discussion' started by fernesto, Feb 7, 2011.

  1. fernesto

    fernesto Junior Member
    Messages: 13

    have a 1995 ford F250. How would I wire up a Western 8.5' pro angle snow plow? Could I just run the new wires in the same place the Fisher ones are? or will the wires hook up to each other? I am going to buy this Western plow bc I have a fisher plow mount and wiring on my truck, but cant find any fisher plows that fit the bracket near where I live. I live near pittsburgh, Pa.

  2. drp

    drp Senior Member
    from ontario
    Messages: 170

    A welder can fix the pin spacing to fit.
  3. snowplowpro

    snowplowpro Senior Member
    from NJ
    Messages: 900

    it depends on what style fisher an older model or a newer model also if you have hb5 headlights or which headlight do you yes you can run them in same place but you also may not even need the western harness if these match up im pretty sure the wiring is the same except for the vee plows .but to answer your question you need to know these things cause older models do not match up with some of western harnesses .:mechanic::mechanic:
  4. fernesto

    fernesto Junior Member
    Messages: 13

    yes I have a older fisher mount with the wires and that is all. I have a welder so I figured I could make a frame to fit it