1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1990 Ford F250 push plates

Discussion in 'Fisher Engineering Discussion' started by BigDave12768, May 2, 2009.

  1. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Does anyone know if the push plates off a 1990 F250 require the bumper to be removed? to be install/removed?
     
  2. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,594

    No- they should bolt right on. If I remember right you have to remove and re-install the shock towers. You have to remove the sway bar if it has one.
     
  3. SuperdutyShane

    SuperdutyShane PlowSite.com Addict
    Messages: 1,517

    On mine, the bumper didnt have to be removed... Of course... Mine is a 94 so there is a slight difference in year.... However, I dont think anything changed.
     
  4. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Dont have to remove the bumper but do have to remove factory bolt bracket fasteners and replace with Fisher fasteners. Do one side at a time or you will end up with the bumper off.
     
  5. Milwaukee

    Milwaukee 2000 Club Member
    Messages: 2,180

    for my boss mount they require bumper to be remove why they are mount to front end of frame that where bumper mount. Mount for 81-91 truck.

    not like 92 to 97 frame which have this L on 3" behind end of frame. Try explain clear. I believe 92 to 97 you could leave bumper on it.

    I am not sure how fisher mount.
     
  6. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Ok thx. I am going to look at plow tomorrow. And I really dont want to get into tons of labor pulling it off.
     
  7. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Left them behind thx for all your help
     
  8. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,594

    19 years of rust- You made the right move:drinkup:
     
  9. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    No they couldnt be that old. But maybe. The plow I bought off truck was only about 10 years old. But even 10 years of rust would be a PIA