1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1964 Chevelle

Discussion in 'Used Plowing and Truck Equipment Forum' started by got-h2o, Jun 30, 2011.

Thread Status:
Not open for further replies.
  1. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    I just listed it on ebay, see link below pic for a bunch of misc pics.

    Car is pretty clean but will need a full restore depending what route you want to go with it. Running and driving 327 and TH350. Starts right, up idles smooth, and drives well. Seats have been redone, floors are ok, but starting to show signs. All glass is there and crack free. Quarters and drivers rocker have been replaced as well as pass fender. Trunk floor was cut out on drivers side during vin inspection, aside from that the trunk floor is solid. Door lowers are starting to go, and the back corners of the doors are starting to rust through. I bought it to start a tube chassis car but ended up trading my drag car for one already done a couple weeks later. I bought it with a title, but no vin tag. I have already gone through the steps for an MVIN and it can now be registered in any state with a clean and clear title. I have a copy of the title I bought it with along with the original vin as well. It is an original Chevelle V8 car. The car sat for a while before I got it, and I got it running and driving. The brakes could use some attention if you plan on driving it daily. They work, but are soft and at least need to be bled. I have been running it from a small can up front to the factory fuel pump. It has old gas in the tank that I would recomend flushing before using it. This is a drivable project and not a reliable daily driver.......yet, although it has a lot of potential to be. Floor pans, door skins, used doors, door panels, trim, etc are very readily available on ebay. There are a lot of cheap resto parts available online.

    This car is not perfect but it has a lot of potential. It is a 2 door hardtop 64 Chevelle that runs and drives. That in itself is big in my opinion.

    I will consider trades or partial trades for anything. Trucks, cars, bikes, plow or salt equipment, will trade up or down. It is listed elsewhere for $4,500 and have been getting a lot of trade offers, but nothing that hits me just right. Cash price is significantly lower for a PS member, and I will consider even $3-5k trades. I will also trade up towards heavy equpt. I don't need the $$ but don't need 2 64's either. Pleas no extreme lowballing. I know what I have here and know what I have into it. Had I not stumbled across a high dollar finished 64 I wouldn't consider selling this one. This has been a dream car of mine for a very long time.


    Last edited: Jun 30, 2011
  2. Mackman

    Mackman PlowSite.com Addict
    from S.E. PA
    Messages: 1,356

    What ever you get for it, make sure you can prove it lol
  3. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    LMFAO!!! Hahahaha that was good :D
Thread Status:
Not open for further replies.