1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

14' Ebling based backblade $3400

Discussion in 'Used Plowing and Truck Equipment Forum' started by slongfellowii, Aug 27, 2012.

  1. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    2 years old. Low hours. Edges still look good. Powdercoat still holing up well other than small chipping around wear points on wings arms. Ebling hitch and QD off 99 Superduty. Many parts bought through Eblings. Mouldboard and wings homemade using measurements from the original. You can not build one cheaper than this with the same quality parts. $3400

    100_6448.jpg
     
  2. brookview

    brookview Junior Member
    Messages: 20

    is there a pump and valve assy. that comes with it
     
  3. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    Yes. Monarch pump. You can just see the top of the valves at the bottom of the red wires going down the tailgate. This is nearly identical to factory other than the fact that I made the mouldboard and wings. All hardware was bought at Eblings. Wiring was bought at B&B with a homemade control box. I took measurements off a friends. Has steel main edge and poly wing edges btw. PM me for contact info.
     
  4. curbbreaker

    curbbreaker Junior Member
    Messages: 0

    do you still have this backblade?
     
  5. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    I may have a buyer. Someone is taking a look at it tonight. Will update later or tomorrow.
     
  6. Pitt4212

    Pitt4212 Junior Member
    Messages: 25

    Can I ask why you are selling it? I am looking at buying a new 12' ebling but have 0 history on their plows and it has to be shipped to me in Mass because there are no dealers even close to me which scares me.
     
  7. ANA Proscapes

    ANA Proscapes Senior Member
    from NH
    Messages: 109

    Where in mass are you? Chappell tractors in Milford NH has sold a couple 3 point hitch blades for tractors. Give them a call and see if they can help.
     
  8. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    Change in the family. Getting out of commercial plowing. They are well worth the money new. I just decided to build instead of bought.
     
  9. slongfellowii

    slongfellowii Senior Member
    Messages: 157

    Sold.............