1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

120" Bobcat Snow Pusher Rubber Edge?

Discussion in 'Heavy Equipment' started by machocheese, Oct 6, 2011.

  1. machocheese

    machocheese Junior Member
    Messages: 2

    Anyone have an idea where I can get an aftermarket edge for this pusher? The Bobcat edge is $640.00.
  2. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    Goggle it, there are sponsors here thar sell them, it's also on e bay, should run about $28-30 ish/ ft. Only thing I could see being an issue is the bobcat pusher isn't as common as say a Protec, or Scoop Dogg
  3. snocrete

    snocrete Banned
    Messages: 2,862

    You could always find some used conveyor belt, it works just the same......if your working by the hour, rubber edges are fine...but if not, you should be looking into Urethane or UHMW polythylene edges.
  4. donleybrent

    donleybrent Member
    Messages: 38

    Pro techs bolt spacing is 12" on center I believe and I just paid $210 for mine.