1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

10' Municipal plow blade (frink or viking) - upstate NY

Discussion in 'Used Plowing and Truck Equipment Forum' started by lumps, Nov 16, 2010.

  1. lumps

    lumps Senior Member
    Messages: 365

    Selling the plow off my dump truck. It's either a Frink or Viking heav duty power angle 10' plow. Good condition overall, except a chunk missing from a corner of the cutting edge. Will get better pics if it's not raining tomorrow. Located in upstate NY. Might be able to deliver, just ask. Asking $2,000 obo. Might sell truck as well.

    [​IMG]
     
  2. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    How much for just the truckside? Cyl, valve assy, etc?
     
  3. newhere

    newhere PlowSite.com Addict
    from Fenton
    Messages: 1,288

    Pitchers of the mount palease.
     
  4. lumps

    lumps Senior Member
    Messages: 365

    Ok, here's more pics of the plow. And yeah, I might sell the truck side, but I couldn't let valve go since it's part of the dump body valve. It would depend how easily I could get the mount off there, but I'd probably be looking to get $1,000 for the truck side parts (inc cyl.).

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  5. lumps

    lumps Senior Member
    Messages: 365

    More:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  6. lumps

    lumps Senior Member
    Messages: 365

    Also, I didn't realize how dirty the thing had gotten sitting this summer until I went to take these pics. I can pressure wash it and clean it up if it gets a little nicer out.
     
  7. SnowMatt13

    SnowMatt13 PlowSite.com Addict
    Messages: 1,534

    I'd swear that's a Gledhill (sp??)
    I have it's twin at work....
    Is there an ID tag on the top right side of the back of the moldboard?
     
  8. lumps

    lumps Senior Member
    Messages: 365

    I looked, couldn't find a name tag on it. It looks like it was repainted at some point, so they must've scraped it off.
     
  9. lumps

    lumps Senior Member
    Messages: 365

    $1,500 obo
     
  10. lumps

    lumps Senior Member
    Messages: 365

    Bueller? Bueller? lol

    this is a fine piece of snow removal equipment right here. very heavy duty. would work great on a truck, or mount it to a loader. $1,250 obo.
     
  11. lumps

    lumps Senior Member
    Messages: 365

    Bump. Still have the blade, sold the truck.
     
  12. dieselguy5245

    dieselguy5245 Senior Member
    from mass.
    Messages: 129

    Why is there welds on the cutting edge?
     
  13. lumps

    lumps Senior Member
    Messages: 365

    It was like that when I got it. I assume it was an effort to reinforce the corners?
     
  14. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    Thats Hard wire to help wit wear. They do it alot with buckets on excavation equipment. Probably done either before wear systems, or by someone unaware that they sell wear systems, (ie Winter equiment).
     
  15. lumps

    lumps Senior Member
    Messages: 365

    Ah, that makes sense.
     
  16. lumps

    lumps Senior Member
    Messages: 365

  17. mikes-plow

    mikes-plow Senior Member
    Messages: 103

    i wonder why there is 2 springs on the right and only 1 on the left??
     
  18. lumps

    lumps Senior Member
    Messages: 365

    I guess 3 is enough for it. My Western is the same way.