1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

10 foot fisher MM2 M/C plow

Discussion in 'Used Plowing and Truck Equipment Forum' started by Big Don, Nov 12, 2011.

  1. Big Don

    Big Don Junior Member
    Messages: 0

    10 foot fisher MM2 M/C plow with less then 50 hours on it for $4600.00
    Bought brand new in December 2010
    Used through two storms and head gear failed
    Fisher replaced the head gear under warranty
    Got it back after snow season had ended in April
    Has full snow foil with slight dent due to head gear issue
    Bought an X-blade to keep the truck in service
    now have too many plows my loss is your gain
    cost $6300 new
    Have new sno-foil kit for an additional $250.00
    (just the plow, not the truck)

    IMG00017-20101212-1630.jpg
     
    Last edited: Nov 12, 2011
  2. tjdozerman

    tjdozerman Member
    Messages: 63

    Where are you located ?
     
  3. Big Don

    Big Don Junior Member
    Messages: 0

    No, the 6300 was just the off truck
    8K for a full M/C set up new
    This is an M/C not an HD plow
    This makes an HD look like a toy
    Big trucks and big jobs require serious snow plowing equipment.
    The FISHER® MC Series is the biggest toughest plow.
    Built for municipal and contractor vehicles in the 17,000-27,500 GVW range,
    the MC Series is just right for narrow streets and intersections and large parking lots
    Blade Width 10′ Blade Height 34″ Gauge 11 Trip Springs 6 Ribs 8
    Angling Rams 2″ x 16″ Plowing Width(Full Angle)8′ 10″ Approx. Weight 1308 lbs
     
    Last edited: Nov 13, 2011
  4. Big Don

    Big Don Junior Member
    Messages: 0

    We are in Franklin MA