1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

08 poly Caster not working

Discussion in 'Fisher Engineering Discussion' started by nor'easter1, Dec 13, 2009.

  1. nor'easter1

    nor'easter1 Senior Member
    Messages: 140

    got an 2008 poly caster not working. Noticed yesterday that blasts was not working unless I freed up the spinner, then it would work. Today nothing light comes on however I am getting this light that flashes four times anyone know the diagnostic code I don't believe it is major thanks for the help
     
  2. bh115577

    bh115577 Senior Member
    Messages: 106

    Go to the fisher site. All manuals are there.
     
  3. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Four flashes means no power. Given that it sometimes works, and sometimes doesn't, sounds like you may have a cable problem. You should be under warranty, so I would take it to the dealer. The truck side cable is over $200. Have you kept the cable connections clean & greased?

    Here's your manual:
    http://www.fisherplows.com/pdf/95749.03_091509.pdf