1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

07 grease fitting ??

Discussion in 'Ram Trucks' started by vmj, Jan 13, 2015.

  1. vmj

    vmj Senior Member
    from conn
    Messages: 752

    There is a sticker under hood for a grease fitting in 4x4 on my 07 3500 ram...pic looks like universal.. I can not find the grease fitting.. anyone know anything about this.....
     
  2. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

    The fitting is on the back driveshaft by the transfer case.That is it with the red mark on it.
    [​IMG]
     
  3. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

    You need a needle tip for the end of the grease gun you can get it at any auto parts or hardware store that sells grease guns
    [​IMG]
    This is the fitting
    [​IMG]
     
    Last edited: Jan 13, 2015
  4. vmj

    vmj Senior Member
    from conn
    Messages: 752

    The fitting is on universal right? I'm guessing the pin greaser sticks into it? Thanks
     
  5. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

    Yes inside.Best way to get it to spin is Jack the truck up under the front diff so you can spin the shaft.Yes the needle pushes the little ball into the fitting allowing grease to be pumped in
     
  6. vmj

    vmj Senior Member
    from conn
    Messages: 752

    Thank you. I will do it tonight...