1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

`05 F250 6.0 No AC

Discussion in 'Ford Trucks' started by ctuna, Jun 24, 2013.

  1. ctuna

    ctuna Junior Member
    Messages: 15

    Can anyone tell where the plug is on the AC compressor?I want to test it for power the clutch is not engaging ,I jumped the pressure switch and still the clutch is not turning.It is so dam tight in there I cant see where the power goes to the compressor so I can jump power right to it.
     
  2. MickiRig1

    MickiRig1 PlowSite Veteran
    Messages: 3,617

    Do you have power to the pressure switch?
    Sure you have a freon charge in it? The low side fitting is on the receiver / dryer tank. Check and make sure it has a charge if you can. Advance has a 12 oz freon can / gage setup for like $30.
     
  3. clark lawn

    clark lawn PlowSite.com Addict
    from NE ohio
    Messages: 1,233

    What kind of compressor do you have a CCI or a Sanden? If the clutch is bad you should be able to see the winding coming out around the clutch.
     
  4. ctuna

    ctuna Junior Member
    Messages: 15

    Turns out it was a fuse under the hood that was not seated in all the way.