1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

04 ram - method of getting codes?

Discussion in 'Ram Trucks' started by elite1msmith, Dec 15, 2009.

  1. elite1msmith

    elite1msmith 2000 Club Member
    from chicago
    Messages: 2,762

    is there a method of getting ecm codes by turning the key with out a scanner? the old dodges i know i could .....
     
  2. ProSeasons

    ProSeasons Senior Member
    Messages: 624

    The key on, key off, key on etc..thing don't work on an '04?
     
  3. JDiepstra

    JDiepstra PlowSite.com Addict
    Messages: 1,780

    On, off, on, off, on should do it. If that doesn't, try adding one more off, on cycle. I'm pretty sure they should appear after the third "on"

    I get a lot of useful info at www.cumminsforum.com
     
  4. Jenkins12

    Jenkins12 Junior Member
    Messages: 27

    It would work think its 3 times on and off then on.
     
  5. cmo18

    cmo18 Senior Member
    Messages: 815

    the key cycle didnt work on my 04, but did on my 01 and my 06...
     
  6. elite1msmith

    elite1msmith 2000 Club Member
    from chicago
    Messages: 2,762

    if it does work do you have the flashing codes list?
     
  7. JWH_03_DODGE

    JWH_03_DODGE Junior Member
    Messages: 6

    I can look them all up :salute:
     
  8. elite1msmith

    elite1msmith 2000 Club Member
    from chicago
    Messages: 2,762

    let me see if i can get it to flash

    do you have a link? its nice having this kinda thing saved to a hard drive
     
  9. JDiepstra

    JDiepstra PlowSite.com Addict
    Messages: 1,780

    They can also be found on the website I posted earlier.
     
  10. JWH_03_DODGE

    JWH_03_DODGE Junior Member
    Messages: 6