1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

03 chevy 2500,4x4neutral light is on

Discussion in 'Truck & Equipment Repair' started by dbduts, Nov 26, 2014.

  1. dbduts

    dbduts Member
    Messages: 59

    i have 03 chevy 2500 and the neutral light comes on and off on the push button dash control. truck still goes and when I hit the 2x4 button it flashes and then goes to 2x4,any ideas
  2. carkey351

    carkey351 Senior Member
    Messages: 229

    could use a few more details: i.e. do you have an "auto" button or just 3 buttons. Will it go into 4x4 and 2wd and stay engaged?

    1. Encoder motor sensor. (on the transfer case)

    4x4 switch assembly could be bad (not likely)

    Also try and shift it with the transmission in neutral. it is best to do this anyway, because it eliminates any binding in the driveline.
  3. dbduts

    dbduts Member
    Messages: 59

    i have 3 buuton,it goes into 4x4 but not low, I think I have to replace encoder ,was hoping not to because of the cost , thanks