1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

02 Toyota Fisher MM1 Push Plates

Discussion in 'Truck & Equipment Repair' started by jonnyb76, Nov 16, 2013.

  1. jonnyb76

    jonnyb76 Junior Member
    from NH
    Messages: 17

    How the Hell do i get to the nuts on the INSIDE of my frame for my push plates on my 02 Tacoma?:realmad:
     
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,528

    Weld a rod to the heads.
     
  3. jonnyb76

    jonnyb76 Junior Member
    from NH
    Messages: 17

    confused

    The Bolt Head is what is on the push plate on the outside of my frame it then goes into my frame where there are washers and nuts. i can only touch the nuts through a tiny hole i can stick my finger through.

    1olddogtwo my response is Huh?:confused:
     
  4. jonnyb76

    jonnyb76 Junior Member
    from NH
    Messages: 17

    Had the bolts cut.

    now to see if my coworker's welder/fabricator friend can revive my push plates for another 10-15 years of use.Thumbs Up