ATV Plow Edge - PlowSite.comô - Snow Plowing & Ice Management Forum

Register free!

Old 02-04-2003, 08:07 PM
HLS Wholesale's Avatar
HLS Wholesale HLS Wholesale is offline
Senior Member
Join Date: Dec 2002
Location: Chicago Near West Sub
Posts: 111
ATV Plow Edge

I've used my ATV only a few times this year, and the cutting edge on my brand new Warn plow is already down to nothing.

Any suggestions on a replacement edge and where to get them? My mechanic thinks the poly blade is too thick for the ATV and will cause the blade to fold over...too heavy. Any thoughts here as well?

Thanks in advance.

Dan Norton
Reply With Quote
Old 02-04-2003, 09:49 PM
little green guy little green guy is offline
Senior Member
Join Date: Feb 2000
Location: Somerset County, New Jersey
Posts: 277
The poly edge works great on quads, we had the same problem that you have, the metal edge on them wears very quick, so we started using poly edges and they don't wear nearly as quick.
Reply With Quote
Old 02-04-2003, 09:51 PM
columbiaplower columbiaplower is offline
Senior Member
Join Date: Feb 2000
Location: Maryland
Posts: 311
go to home depot and get a piece of steel that is about the samee size as ur current blade, and then drill some holes in it (using the old blade as a template) sure beats buying one
Reply With Quote
Old 02-05-2003, 01:00 AM
Jerre Heyer Jerre Heyer is offline
Senior Member
Join Date: Mar 2002
Location: Erie, PA
Posts: 948
We use a western sport utility edge. Cut to length and cut in new holes. On some of the ATV's we cut the holes in the center to create a blade that can be flipped over like the old western center punched blades. These 1/4" edges are 1080 carbon steel and hold up well. Jerre
Jerre Heyer

online questions and answers

F350 X-cab V10 W/ 810 or 8611LP BLIZZARD
Or a 7'4"-8'6" Rad Snow blower hanging out front
Reply With Quote
Old 02-05-2003, 01:52 PM
Lawn Lad Lawn Lad is offline
Senior Member
Join Date: Feb 2002
Location: Cleveland
Posts: 407
Get a urethane edge. We've been using it all season. Some wear on it, but it's fine. The edge has about 70 miles on it (odometer reading). The best part is the reduced triping. The number of times I ate the handle bars with the steel edge versus now. Before I didn't want to plow over 6 to 7 miles an hour with the steel edge. Now, I comfortably plow at 8 to 12 miles an hour depending on depth and the sidewalk since the urethane edge rides over the pavement imperfections. I'll admit I've hit 15 plus an hour on a known area of sidewalk. I didn't fear tripping with the urethane - and didn't for that matter.

Cost wise - fairly in expensive considering the 8" wide piece of material gets ripped into two 4" wide pieces - giving you at least 4 wear surfaces if not more. I think the cutting edges will outlast the ATV at this point.

Call Dino at Exterior Solutions: 860-859-0739.
Reply With Quote
Old 02-05-2003, 06:45 PM
plowking35 plowking35 is offline
2000 Club Member
Join Date: Dec 1999
Location: SE CT
Posts: 2,923
I piece of urethane 3/4" thick 8" wide will cost 17.00 per foot with shipping. So 4' would be like 70.00 and you would get 2 edges from it. If you center drill each piece you will have 4 wear surfaces, that like was mentioned will probably outlast the plow. Call me at 860-608-1842 and I will be happy to order one for you.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with plow headlights wxmn6 Commercial Snow Removal 15 01-23-2010 07:29 AM
Fisher V Plow Edge? BASIC Commercial Snow Removal 1 01-20-2004 04:19 PM
Rubber Plow Edge Or Steel? Plowanator Commercial Snow Removal 6 01-19-2004 05:12 AM
New Triple edge plow system CPSS Commercial Snow Removal 9 02-16-2003 12:31 AM
Price of plow for ATV J&R Commercial Snow Removal 8 01-20-2003 08:42 AM

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©2000 - 2012 PlowSite.comô Grand View Media
All times are GMT -5. The time now is 03:03 PM.

Page generated in 0.02643 seconds with 8 queries