Wiring Help

[jhall22guitar]

Hey everyone!

I am looking to finally hardwire my lights when i add in the final ones. I will have an Axxixtech Mini Falcon and 2 Strobes N More E3 Series lights on my Back Rack and possibly a SVP Mini Phantom MAX on my rearview mirror.

I have never hardwired anything to my truck before and would like an idea on how to do it correctly. (I already own the SVP Mini Phantom and Mini Falcon; both are currently cigar plugs)

I would like to get the following switch setup: Master Switch, Mini Falcon, E3's, and Phantom. I would also like to get a switch that will toggle the flash patterns of the E3 and Falcon. So thats 6 switches. (Any extras will be used for later ad-ons.

If someone could help with a diagram that would be a big help!

Thanks! Cant wait for this winter!

[dieselss]

First,,,you need to either find a switch box/panel that you like and then mount it where you want it. Wiring would be next,,,and the easiest

[jhall22guitar]

I want the diagram, I have a switch on strobes N more i would get (10 switch) or a 6 switch if i can get one. And i have a location in my dash where there used to be a cupholder or something that broke and Ill put it in that space.

[dieselss]

Ok. Well the diag ain't nothing big then. I can work on it later and post it. Tom if someone don't beat me to it

[dieselss]

If you get a preloaded switch box,,,alls you have to do is pwr and gnd. Then add your strobe pattern switch

[jhall22guitar]

http://www.strobesnmore.com/Brooking...ntrol-Box.html

I was looking at this. and I wouldnt know how to do a Master switch and then all of the others as separates. so thats why i need the help.

[RBRONKEMA GHTFD]

Ok, I think I read this correctly. You want everything on 1 switch? Or do you want everything on its own switch with 1 switch controlling power to each of the other ones? (master switch)