purple dodge project

[dodgegmc1213]

hey everyone i know its been awhile but finally did somemore work to the truck. im in the process of changing the ball joints, tie rods, axle u-joints, streeing stabilizer, and the pitman arm. i was gonna do all my brake pads, rotors, and calipers in the fall but found out my front pads were alil bad and the driver rotor is all messed up i had to beat it with a hammer to get it off. so im gonna change the front brakes now while i have it all apart.

[dodgegmc1213]

1st pic is after we got the ball joints out what a b**ch.
2nd pic is the old tie rods and steering stabilizer.
3rd pic is the new tie rods.
4th pic is the new u-joints installed.
5th pic is the axle back in and the new ball joints.

[dodgegmc1213]

heres the driver side almost done. just waiting for the brake stuff

[dodgegmc1213]

heres the driver side all done with the new rotor caliper and pads. then a pic of the tie rods and steering stabilizer installed.

[dodgegmc1213]

heres a pic of the pass. side all done. wheels are back on, took it for alil ride gonna get an alignment tomorrow moring. i got my new exhaust also, flowmaster american thunder dual exhaust. gonna maybe start that tomorrow as well.

[Sawboy]

Nice!!

......

[dodgegmc1213]

thanks, sawboy

[dodgegmc1213]

got the new flowmaster exhaust installed today, sounds awesome!