Built-in back up buddy

[I HATE RUST]

I have a Built-in back up buddy on my truck

[MIDTOWNPC]

nice install.

what do the amber lights do? just stay on? flash?

[I HATE RUST]

Originally Posted by MIDTOWNPC

nice install.

what do the amber lights do? just stay on? flash?

yea they flash, thanks

[alwayz-plowin]

Nice Did you do all of the work yourself??
What are your switches/ controller lookin like?
what kind of controller is it?

[I HATE RUST]

Originally Posted by alwayz-plowin

Nice Did you do all of the work yourself??
What are your switches/ controller lookin like?
what kind of controller is it?

yes i love to little stuff like this and there is a current talk about my switch box at the bottom of this page below

http://www.plowsite.com/showthread.php?t=42969&page=106

thanks for the comment

[Lux Lawn]

Looks Nice.

[alwayz-plowin]

niceeeee little pricey is right!

Originally Posted by I HATE RUST

yes i love to little stuff like this and there is a current talk about my switch box at the bottom of this page below

http://www.plowsite.com/showthread.php?t=42969&page=106

thanks for the comment

[mike1316]

What did u use to cut the holes in ir bumper

[M & MD Lawn]

I envy that control box!

[njsnowremoval]

Thought id bring back a dead thred. i like the look of the ambers in the bumper, what did you cut those out with? thanks

[I HATE RUST]

Originally Posted by njsnowremoval

Thought id bring back a dead thred. i like the look of the ambers in the bumper, what did you cut those out with? thanks

I drilled two holes with a 2 1/2 inch (I think) hole saw, then cut out the rest in the center with a cut off wheel. it is very hard to get everything strait because all of the lines on the bumper are curved.

THANKS FOR BRINGING IT BACK

[WesternproGMC]

to the amber strobe work with the turn signal too like these http://www.pmlights.com/products.cfm...Id=63&pId=2574 ?

[Plow man Foster]

Are those just regular amber 6" oval lights or are those the whelen built inflashing ones? I know they flash i just want to know if they're going into another "flasher" box or not...

[I HATE RUST]

Originally Posted by Plow man Foster

Are those just regular amber 6" oval lights or are those the whelen built inflashing ones? I know they flash i just want to know if they're going into another "flasher" box or not...

yea they are the whelen built in flashing ones

[mn-bob]

Nice job on the lights I think i will try it on mine . Bob

[milwaukeevtwin]

Originally Posted by I HATE RUST

I drilled two holes with a 2 1/2 inch (I think) hole saw, then cut out the rest in the center with a cut off wheel. it is very hard to get everything strait because all of the lines on the bumper are curved.

THANKS FOR BRINGING IT BACK

measure down each side snap a chalk line works good

[just plow it]

Here is a picture of my back up lighting. 55w halogen lights. Works awesome, I would have bought LED except the price is out of my range for disposable lights. These are from Code 3.