Bought 1st cans, where should I use this stuff?

[BC Handyman]

Originally Posted by jimslawnsnow

I have used it all over. When working with sand salt mix I get sand in the zipper of my coats. It makes the zipper go up and down very hard. A good coating of FF will turn it back to normal again.

Hmmmm, great idea, I would never of thought of that.

[scott3430]

I dipped the end of our house key in it and slid it in the deadbolt a few times - works better now.

[shovelracer]

If you have stuffed sinuses wipe a little under your nose. After the burning subsides you'll be breathing free and clear like never before. Repeat as needed. Also works for trucks too.

[scott3430]

Srayed FF on my truck tailgate hinges, bolts, cables. Also did the truck door hinges.

[jimslawnsnow]

Originally Posted by scott3430

Srayed FF on my truck tailgate hinges, bolts, cables. Also did the truck door hinges.

Don't forget the locking area on the side of the door. I had to spray mine this am in -10. Worked perfect.

[scott3430]

Originally Posted by jimslawnsnow

Don't forget the locking area on the side of the door. I had to spray mine this am in -10. Worked perfect.

Oh yeah I forgot say I also sprayed the locking area on all the doors. But thanks for the reminder Jim,

I also sprayed the hood latch and release area.

[BC Handyman]

hood latch, good idea!