PDA

View Full Version : Homesteader Question


jcald
03-04-2006, 03:26 PM
Does anyone on this site either sell or know a web site that sells parts for the Homesteader. I am missing bolts for my cutting blade on the 7'4" homesteader and I'm looking to buy the bolt kit that the fisher site shows but am having problems finding anyone that actually sells them online.:help:

Crash935
03-04-2006, 04:33 PM
You can try sending a PM to Arc Burn (search members list) hes a fisher dealer there in new york.

nsmilligan
03-04-2006, 06:09 PM
I'm not sure about the Homesteader, but most Fishers use a 1/2"x 1 1/2 carriage bolt for the edges. Try your local NAPA dealer or a fastener dealer in your area, make sure they are Grade 5 bolts, a lot of carriage bolts are grade 2 and will break/shear. Take one of the bolts off and check the size.

Bill

ashsupply
06-02-2006, 12:36 PM
Does anyone on this site either sell or know a web site that sells parts for the Homesteader. I am missing bolts for my cutting blade on the 7'4" homesteader and I'm looking to buy the bolt kit that the fisher site shows but am having problems finding anyone that actually sells them online.:help:
we sell them over the phone, we are a distributor in NH. 1-888-314-0811. the bolt bag is part #27574 $10.29 plus UPS we ship daily

mcwlandscaping
06-03-2006, 01:15 AM
we sell them over the phone, we are a distributor in NH. 1-888-314-0811. the bolt bag is part #27574 $10.29 plus UPS we ship daily


where in NH are you located? do you also sell plows or are you parts only?