PDA

View Full Version : extreme v motor replacement


pats plowing
03-21-2013, 04:35 PM
Any tips on how to replace the motor on extreme v? Last storm the plow just began clicking at a high rate of speed, only way to turn it off is to unplug the battery cable from the truck to the plow. I replaced solenoid and isolation module at plow and still have the clicking. Trying jumping the positive and negative terminals on the plow motor and got no reaction so I believe motor is bad. I looked online and there are diagrams but not for the extreme v in which the motor is basically upside down from a typical mm2 plow. Any tips from those who have done it? Btw this plow is 1.5 seasons old and was not used last year.

Burkartsplow
03-21-2013, 05:23 PM
It has a 2 season warranty on the plow. Take it to the dealer before the season is over.

pats plowing
03-21-2013, 10:35 PM
purchase date was oct 2010 so I am unfortunately out of warranty just didnt even use it 2010-2011 due to no snow