PDA

View Full Version : 575 spreader harness to short


Afaust1570
10-28-2011, 06:20 PM
Just set up a new Mini pro spreader and the harness from the main to the control
Box is about a foot to short. Do they make a plug in extender or do I have to splice the hard wire

2COR517
10-28-2011, 07:00 PM
What kind of truck - cab/bed length.

Afaust1570
10-28-2011, 11:55 PM
What kind of truck - cab/bed length.

01 dodge ext. cab long bed

SnowEx Products
11-01-2011, 02:44 PM
The harness should be long enough for your setup. You may try adjusting the harness at the junction where it goes into the cab. At this junction, there is a plastic piece that locks the wire into place. The plastic piece can be loosened so you can pull more wire through. If this doesn't work, perhaps you can give us a call at 1-800-SALTERS to discuss the issue further. Thanks for being a SnowEx customer!

Wayne Volz
11-03-2011, 06:22 PM
Don't cut, splice or otherwise mess with the wiring harness. You need to redirect your route to the control box.

Call SnowEx for questions 1-800-salters. You will like the spreader.